How to use?
1, Connect led fixture, address writer, power supply correctly and power on.
2, Press [+" until display show the address you want, press [enter"
3, Corresponding led will light on when you press "+" or [-".
|
Item |
Function |
Description |
|
1 |
PWR |
2 Pin power input cable, power supply for address writer (9~24V) |
|
2 |
Signal |
3/5 Pin XLR signal output cable, connect with led fixture DMX signal input cable |
|
3 |
Display screen |
Display the current address (the corresponding light will light up) |
|
4 |
+ |
Display screen address add 1 |
|
5 |
- |
Display screen address minus 1 |
|
6 |
Enter |
Confirm the display screen's address |
Example:
Set origination address for 16segments dmx led bar is 001.
1, Connect dmx led bar, address writer, power supply correctly and power on.
2, Press [+", and when it display [001"
3, Press "enter", the 1st pixel show red
4, Press "+", it display [002", the1st pixel show green
5, Press "+", it display [003", the 1st pixel show blue
6, Disconnect connection. Set address for other lights if necessary.